Fire bio-protection structure for wood.
Delivered in a kind of crystalline powder, it is easily, practically without a deposit, dissolved in cold water. It is very economic in application. It provides the 2nd group of fireproof efficiency at the consumption 550 g/m2, according to requirements of fire safety established in Russia (НПБ 251-98).
 Fire-bioprotection compound "Stabiterm-1” represents a mixture of fire-retardants, a surface-active substance and an antiseptic. The compound is applicated for external and deep impregnation of wood and materials on its basis to decrease their fire danger and protect against biodamages. The A component is used to achieve only fireproof effect. A and B components are used to achieve also fire and bio protection effect. It is perfect to indoor works.
 Fireproof parquet varnish for wood. It forms very strong, transparent, glossy film on a wood surface. After harden the film is steady against stress and abrasion. Provides 1st group of fireproof efficiency at the consumption not less 350 g/m2 (without technological losses) according to requirements of fire safety established in Russia (НПБ 251-98).
 Fireproof water deluting varnish for wood and wood products (including panels LDSP etc.). Varnish could be put on the surface of the above-stated materials, covered by others protective lacquering. It has a form of milky-white viscous liquid. After application it forms a transparent, matte film steady to ultraviolet and aging. It provides 1st group of efficiency at 330 g/m2 of consumption, according to requirements of fire safety established in Russia (НПБ 251-98). In application not less than 330 g/m2 (without technological losses) it provides (according Russian construction norms) LS and FR indicators, that allows to apply it on walls of evacuation ways, on ceilings in the corridors, halls and foyer.
 «Stabiterm-207» is a multicomponent system representing fine mix of fireproof components, binding and rheological additives in organic solvent. The paint is applied for fire protection of steel load-carrying structure in industrial and civil building indoor or in atmospheric conditions (under tent). It is perfectly put by airless/texture sprayer. roll or brush. The fireproof paint of "Stabiterm-207" forms an equal, dense surface after drying. In atmospheric conditions a fireproof paint "Stabiterm-207" needs to be protected additionally by a layer of "Stabiterm -007".
| Fireproof efficiency |
Reduced thickness of metal, mm |
Paint consumption, kg/m2 |
DFT, mm |
| 90 minutes |
5,8 |
2,5 |
1,8 |
| 45 minutes |
3,4 |
1,3 |
0,95 |
Stabiterm217
Water deluting fireproof paint for metal constructions
The fireproof water deluting paint for metal constructions "Stabiterm-217" is a multicomponent system consisting of fireproof components: binding components and rheological additives. The paint swells up under the influence of high temperatures (+200 ºС) and forms porous heat-insulating layer (30-40*h), where h – Dry Film Thickness of a fireproof paint. The fireproof paint "Stabiterm-217" has a good rheological properties and high dispersion. After drying, it forms a dense bed with high decorative properties.
| Fireproof efficiency |
Reduced thickness of metal, mm |
Paint consumption, kg/m2 |
DFT, mm |
| 90 minutes |
5,8 |
2,5 |
1,8 |
| 45 minutes |
3,4 |
1,3 |
0,95 |
Stabiterm-317
Water deluting fireproof paint for metal ductwork.
Staboterm-317 is a thin-layer fireproof coverings for metal, including the zinced ductwork. At high temperature the paint forms heat-insulating foam providing effective protection of ductwork from influence of a thermal stream and a flame. Thanks to magnificent adhesion it stands vibration and deformations of ductwork. It is the non-polluting fireproof material without asbestos and other components, unhealthy for person and environment.
| Fireproof efficiency |
Ductwork's wall thickness, mm |
Paint consumption, kg/m2 |
DFT, mm |
| EI-60 |
0,8 |
2,4 |
1,4 |
Srabiterm-15
Fire bio-protective impregnation for wood
It is characterized by the moderate consumption, 220g/m2 – for the first group of fireproof efficiency and 120g/m2 for the second group of fireproof efficiency, according to requirements of fire safety established in Russia (НПБ 251-98).Stabiterm -15 is delivered in the liquid state and it can be applied at temperature not below -20°C. It has high bioprotective characteristics.
Srabiterm-021
Water deluting primer for metal surfaces
Thin-layer, anticorrosive covering for all kinds of metal surfaces. Provides good adhesion between a substrate and the primer, and between the primer and the put covering.
Srabiterm-022
Phosphatic primer for metal surfaces
It is applied to priming of the metal, galvanized and zinced steels. The consumption - Provides 50-60/m2 high anticorrosive properties and good adhesion. It can be applied on the metal surfaces having the centers of corrosion.
Srabiterm-007
Sheeting for all kinds of fireproof structures
Makes fireproof paints and impregnations atmosphere resistant. Doesn't reduce fireproof efficiency. The covering is thin-layer and quick-drying. It could be put on by a spray in one pass. The covering is white and glossy after drying.
Please note that quick access to pages of specific products is also possible from the products menu on the right side of the screen. |
