FIRE PROTECTION FOR CABLES AND CABLE LINES

FIRE PROTECTION FOR CABLES: STABITERM-225

Fire protection coating for cables with polyvinylchloride, polyethylene, and rubber outer sheath.

Стабитерм 225, огнезащита кабеля
Stabiterm-225
fire protection coating for cables
Cable sheath coated with flame retardant
paint for cable Stabiterm-225

Request for technical data sheet

COMPOSITION FOR FIRE PROTECTION OF CABLES

GENERAL INFORMATION AND APPLICATION OF STABITERM-225

Stabiterm-225 water-based fire protection composition for cable protection is a complicated, multi-component system, comprising a mixture of flame retardant components, fillers, functional additives in a water-dispersed binder. In the process of heating, intumescence of Stabiterm-225 fire protection composition occurs. The formed coked foam protects the cable sheath from burning out.

Application features and properties

The composition applied to the cable with a dry layer thickness of at least 0.8 mm (consumption: 1.36 kg/m²) provides the high fire protection efficiency and the continuous current rating reduction factor of not less than 0.98 in accordance with the requirements of GOST R53311-2009 “Fire-retardant cable coatings. Methods for determination of fireproof efficiency”. Stabiterm-225 fire protection coating meets the requirements of the “Technical regulations of fire safety” (Federal Law No. 123 dated 22.07.2008).

It is used the protection of cables with polyvinylchloride, polyethylene and rubber outer sheath operating indoors (heated and unheated premises), outdoors (at ambient air temperature from -50°C to +50°C) and in moderately aggressive environments from the ignition and spread of fire. 

HIGHEST QUALITY FIRE PROTECTION FOR CABLES

UNIQUE PROPERTIES AND ADVANTAGES STABITERM-225

9

The coating is compatible with the most widely used types of insulation: polyvinyl chloride, polyethylene, and rubber. Dry solids content is 65-69%.

9

The guaranteed service life of the coating is 20 years if the application and service conditions are observed.

9

It is possible to apply the coating by any convenient method: by airless spraying or hand tools (brushes, rollers).

9

The suspension-based composition provides savings on consumables for the airless sprayer, as no frequent replacement of nozzles is required.

When heating, intumescence of the fire protection composition occurs. The resulting coked foam protects the cable sheath from burning out.

TECHNICAL INFORMATION

Certificates

The safety of fire protection composition is confirmed by the Certificate of State Registration RU.70.06.01.008.E. 003434.08.16 dated10.08.2016. The fire resistance rating is confirmed by the Certificate of Conformity S-RU.PB34.V.01842 dated 22.12.2015. The Quality Certificate confirming the main physical and chemical properties is issued for each lot.

Fire resistance rating
The fire protection composition applied to the cable with a dry layer thickness of not less than 0.8 mm (consumption: 1.36 kg/m²) provides the fire protection efficiency and the continuous current rating reduction factor of not less than 0.98 in accordance with the requirements of GOST R53311-2009 “Fire-retardant cable coatings. Methods for determination of fireproof efficiency”.
Physical and chemical properties
Appearance of the composition Light gray suspension
Coating appearance Matte smooth surface, without cracks, craters, and wrinkles
Dry solids content, not less than, % 67 +/-2
Density, g/cm³ 1,2-1,3
Diluent water
Characteristics
  • The fire protection composition is produced in a ready-to-use form
  • Color: gray
  • Diluent: water
  • Minimum application temperature: +5°С
  • Guaranteed shelf life in an original unopened package: 12 months
  • Packing: “Jet-180” plastic bucket, product net weight is 20 kg