Stabiterm-022
Primer for metal structures
Stabiterm-022
primer for metal products
Request for technical data sheet
PRIMER FOR METAL SURFACES
GENERAL INFORMATION AND APPLICATION STABITERM-022
Stabiterm-022 primer is designed for the first priming of products of black metal, galvanized steels, including galvanized and non-ferrous metals for subsequent covering with PWMs. It provides adhesion to other PWMs. The primer is compatible and can be used with the following compositions:
ЛКМ. Грунт совместим и может применяться с составами Stabiterm-317, Stebiterm-217, Stabiterm-207, Stabiterm-219, Stabiterm-209, Stabiterm-221
ЛКМ. Грунт совместим и может применяться с составами Stabiterm-317, Stebiterm-217, Stabiterm-207, Stabiterm-219, Stabiterm-209, Stabiterm-221
Metal protected with Stabiterm-022 primer can be used in the open air conditions. When used in combination with Stabiterm-317 fire protection coating, it provides fire rating for air ducts of up to EI 60 min.
It has good anti-corrosion properties. The primer increases the adhesion of the coating to metal and significantly inhibits the development of underfilm corrosion. It provides excellent adhesion with Stabiterm fire protection coatings and other coatings.
UNIQUE PROPERTIES AND ADVANTAGES STABITERM-022
Excellent anti-corrosion properties
The primer contains pigments conferring enhanced anticorrosive properties to the coating.
Fast drying
When carrying out the application works at a temperature of 20°C, the subsequent layer may be applied after 6 hours.
Low consumption
100 g/m², excluding loss. The primer can be applied with a sprayer.
UNIQUE PROPERTIES AND ADVANTAGES OF STABITERM-022 PRIMER
Certificates
A Quality Certificate is issued for each lot, which confirms the main physical and chemical properties
Physical and chemical properties of Stabiterm-022
| Composition appearance | Red-burgundy liquid |
| Coating appearance | Matte or semi-glossy surface |
| Dry solids content, not less than, % | 58-64 |
| Relative viscosity acc. to B3-6, not less than | 60 |
| Diluent | Xylene |
| Dispersion, not less than, μm | 50 |
| Coating adhesion to surfaces made of ferrous metal, galvanized steels, points | 11 |
| Resistance to static effects of: — water — 5% sodium chloride solution, not less than, hours — water — 5% sodium chloride solution, not less than, hours |
240 240 |
| Color | Red-brown |
| Packing (may be different at customer’s request) | 5 and 25 kgs metal bucket |
| Color | Red-brown |