Stabiterm-217
fire protection coating Stabiterm-217
be supplied both in liquid and dry forms
Request for technical data sheet
GENERAL INFORMATION AND APPLICATION STABITERM-217
UNIQUE PROPERTIES AND ADVANTAGES STABITERM-217
Dry solids content is not less than 71%
Reduces the labor costs
High dispersion ability
Compatibility
Application in different conditions
Savings on transportation
Service life is up to 25 years
TECHNICAL INFORMATION
Certificates
Certification: fire resistance rating is confirmed by Certificate of Conformity S-RU.PB34.V.01165 dated 05.17.2013. The safety of use is confirmed by the Certificate of state registration RU.78.01.05.008. E.001029.06.13 dated 28.06.2013.
Fire resistance rating
| Fire resistance rating | Effective metal thicknes |
Consumption* (kg/m²) |
Dry layer thickness (mm) |
| 15 минут | 1 | 0,85 | 0,53 |
| 15 min | 3,4 | 0,25 | 0,15 |
| 30 min | 3,4 | 0,72 | 0,45 |
| 45 min | 1,5 | 2,51 | 1,57 |
| 45 min | 3,4 | 1,2 | 0,75 |
| 45 min | 7,8 | 0,53 | 0,33 |
| 60 min | 3,4 | 1,93 | 1,2 |
| 90 min | 4,1 | 3,04 | 1,9 |
| 90 min | 5,8 | 2,3 | 1,44 |
| 90 min | 8,9 | 1,76 | 1,1 |
| 120 min | 7,8 | 3,6 | 2,25 |
*Process loss is not included
Physical and chemical properties
| Composition appearance | White suspension, or white powder |
| Coating appearance | After drying, it forms a matte, even surface without pores and cracks |
| Dry solids content, not less than, % | 71 |
| Density, g/cm³ | 1,2-1,3 |
| Diluent | water |
| VOC | no VOC |
Characteristics
- Used for fire protection treatment of metal structures.
- The principle of action is based on the intumescence of the applied coating under the influence of high temperatures (from +200°C), and the formation of a porous heat-insulating layer.
- Color is white (can be tinted to pastel shades).
- Minimum application temperature: +5°C.
- The guaranteed shelf life in an original package: 12 months.
- Packing: 20 kg.
Reference list for Stabiterm-217
ExpoCenter, Moscow, MR, Russia JSC Radiopribor, St. Petersburg, Russia Production facilities of the Mnogo Mebeli company, Saratov region, Russia JSC Kazan Helicopter Plant, Kazan, Tatarstan, Russia JSC Ammoni, Mendeleevsk, Tatarstan, Russia Sverdlov State Owned Enterprise (Shop 4 (19/2)), Dzerzhinsk, Nizhny Novgorod region, Russia Lakinsk brewery, Lakinsk, Vladimir region, Russia Bor Glass Factory, Electrical substation, Bor, Nizhny Novgorod region, Russia Pulp and Paper Mill, ILIM Group, Koryazhma, Arkhangelsk region, Russia UNILIN, laminate production plant, Dzerzhinsk, Nizhny Novgorod region, Russia Solar panel production plant, Novocheboksarsk, Chuvashia, Russia JSC GAZ Automobile Plant Skoda assembly, Nizhny Novgorod, Nizhny Novgorod region, Russia Yarpivo Baltica, Yaroslavl, Yaroslavl region, Russia JSC PechoraNeft, Bugulma, Tatarstan, Russia JSC MCC EuroChem, expanded polystyrene foam blocks production workshop, warehouses, Volgograd, Volgograd region, Russia TyumenSpetsInzhenering LLC, Tyumen, Tyumen region, Russia OJSC Mondi Timber Industry Complex, Syktyvkar, Komi, Russia Avtomash LLC, trade and office building, Nizhny Novgorod, Nizhny Novgorod region, Russia Poultry Farm Seymovskaya, Kulebaki, Nizhny Novgorod region, Russia Masloproduct LLC, processing workshop, Voronezh, Voronezh region, Russia OJSC Mondi Timber Industry Complex, Syktyvkar, Komi, Russia Novoarzamassk Gas Compressor Station, Nizhny Novgorod region, Russia LukOil, Uzbekistan OJSC Zainsk Sugar, Tatarstan Chelny-Broiler LLC, Naberezhnye Chelny, Tatarstan, Russia Gorod SC, Saratov, Saratov region, Russia Maxi SC, Smolensk, Smolensk region, Russia Orange SC, Saratov, Saratov region, Russia Trikotajniy Ray SC, Orsk, Orenburg region, Russia Magnit Hypermarket, stlmt. Emanzhelinsk — stlmt.Esaulsky, Chelyabinsk region, Russia PLAZA SC, Nizhny Novgorod, Nizhny Novgorod region, Russia Magnit Hypermarket, Dzerzhinsk, Nizhny Novgorod region, Russia Tura Market, Phase 3, Kazan, Tatarstan Rio SEC, Nizhny Novgorod, Nizhny Novgorod region, Russia Magnit Shopping Complex, Ekaterinburg, Sverdlovsk region, Russia Logistic warehouse, stlmt. Levchenko, Tatarstan, Russia SUMMIT Business Center, Yekaterinburg, Sverdlovsk region, Russia MEGAMARKT SC, Ekaterinburg, Sverdlovsk region, Russia Car showroom with service area, Krasnoyarsk, Krasnoyarsk Territory, Russia Gudok shopping center, Samara, Samara region, Russia Ryazan Airborne Command School, Ryazan, Ryazan region, Russia Orsk State Drama Theater named after A.S. Pushkin, Orsk, Orenburg region, Russia Ministry of Defense sites, Kostroma, Ivanovo, Kubinka, Russia Zavelichye Military Town, Pskov, Pskov region, Russia Brateevo Electrodepot, Moscow Metro, Solntsevo, Mitino, Moscow, overpasses JSC Saravia Airport, Saratov, Saratov region, Russia Koltsovo Airport, Ekaterinburg, Sverdlovsk region, Russia Strigino International Airport, Russia JSC Poultry Farm Severnaya, feed production plant, Siniavino, Leningrad region, Russia Cattle complex, Bogorodsky district, Nizhny Novgorod region, Russia Cattle complex, stlmt. Linda, Nizhny Novgorod region, Russia Cattle farm, Kirov region, Russia
Application instructions
Surface preparation
The surface, on which the composition is applied, should be free from dust, dirt, and old coatings. Prior to application of Stabiterm-217 fire protection coating, the surface should be primed with GF-021 primer, or Stabiterm-022 phosphating primer, or their analogs. In the case of using phosphating primer, the presence of corroded areas with sufficient adhesion to the metal surface is allowed.
Application
Application of Stabiterm-217 fire protection composition on the metal surface may be performed using an airless sprayer, brush, and roller at an ambient temperature of not below +5°C and relative humidity of not more than 80%. Prior to application, the composition should be thoroughly mixed. During application, additional mixing is recommended to increase flowability. If necessary, it may be diluted with water to a working viscosity. The optimum thickness of the first layer is up to 500 µm. The thickness of the next layers may make up to 1000 µm. The coating is applied in 2-3 layers. Interlayer drying time is 3-6 hours at a temperature of +20°C. If the temperature decreases, drying time should be prolonged.
Safety precautions
All application works should be performed in accordance with the guidelines established by GOST 12.3.035-84 “Occupational safety standards system. Construction. Painting. Safety requirements”. The composition does not emit substances harmful to human health and does not irritate the skin. In case of composition’s contact with skin, rinse the area of contact with warm water and soap.
Service life
The service life of the coating is not less than 25 years in the heated space if the application and service conditions are observed. The service life of the coating is not less than 20 years in the open air if the application and service conditions are observed.
Tool cleaning
We recommend rinsing the tools and equipment used for the application with water before drying the composition.
Storage and transportation
The guaranteed shelf life in unopened original packaging is 12 months. Storage conditions are from +5°C to +40°C. Transportation of Stabiterm-217 is allowed by all types of transport that ensure the safety of packages, in accordance with the rules for the carriage of goods in force for these types of transport.
All data specified in this document, except for the data confirmed by official certificates, are indicated for reference, based on laboratory tests and practical experience of use. The manufacturer shall not be responsible to the third parties for damage caused by improper or unauthorized use of the material.